Car Door Draught Excluders Self-Grip


Products

Home

The Composite Self Grip type draught excluders shown below can be used in many situations and on many vehicles manufactured from the early 1950`s to the late 1970`s. They also have many applications for Kit and Custom car builders. They are designed to fit panels of 1.6mm to 3mm.

Note. Where are item is marked with a after the price, this indicates that it is available on Special Offer, click on link to go directly to that page.

UNTIL FURTHER NOTICE ALL PRICES SHOWN BELOW ARE ON OFFER AT A DISCOUNT OF 10% (Mail Order Only)

 

Car Door Seal, easyfit suitable for panels 1.6 to 3 mm

DX71 Price £5.11 per yard (914mm)

Used on some MG Sports models

Overall Width 15/16 inch

Rubber Seal 5/8 inch dia.approx.

PVC Selfgrip Car Door Seal for panels 1.6 to 3mm

DX80 Price £6.95 per yard (914mm)

Door Seal with Plastic Carrier

Overall width 15/16 inch

Rubber Seal 5/8th dia.approx.

Car Door Seal for panels 1.6 to 3mm

DX73 Snappon section 15mm high - rubber seal 10mm wide

Price £5.75 per yard (914mm)

DX84 Price £7.72 per yard (914mm

Overall width 1.3/16 inchs

Snappon section 9/16" high

Car Boot/Trunk Seal for 5mm panels

DX79 Price £6.95 per yard (914mm)

Fits 5mm panels

Car Boot Seal for 1.6 to 3mm panels

DX70 Price £6.20 per yard (914mm)

Overall height 1.25 inches

Rubber Seal 9/16 dia.approx.

Car Boot/Trunk or Bonnet Seal for panels 1.6 to 3mm

DX83 Price £5.04 per yard (914mm)

Overall height 1.75 inches

Rubber flange 1.3/16 inches

DX91 (PVC Channel) Price £4.60 per yard (914 mm)

Boot/Bonnet Seal (used on some MG Sports models)

DX76 Price £5.26 per yard (914mm)

Used on some MG Sports models as Bonnet Seal

Overall height 13/16 inch

DX77 Price £5.26 per yard (914mm)

Overall height 3/4 inch

E250 Door Seal with Embossed PVC Carrier with small round sponge bead. Stocked in Black only. Can be used as a less expensive alternative to the Woven Snappon as fitted to Morris Minors and Austin A30/35 models.

Price £4.75 per yard (914mm)

Door Seal, can be used for many applications

E216 - A PVC Edge Trim, embossed finish. Stocked in Black, Red, Grey, Green, Blue, White and Brown. Fits edges up to 3/16" wide (5mm). 9/16 " high overall approx.

Price £2.70 per Yard (914mm) or £2.92 per Metre

PVC Edge Trim for panels up to 5mm in width

E710 - A Smaller PVC Edge Trim than above. Stocked in Black, White and Grey. Fits edges up to 2.5mm wide, 3/8" high overall approx.

Price £2.70 per Yard (914mm) or £2.92 per Metre

PVC Panel Edge Trim, fits edges up to 2.5mm in width

E2160 - A PVC Edge Trim but larger than E216, fits edges up to 8mm stocked in Black only, 5/8" high overall approx.

Price £3.50 per Yard or £3.79 per Metre

 

 

 

DX75 Designed for 6mm (1/4 inch) panels therefore suitable for many glass fibre bodies.

Overall Width 15/16" inch, Overall height 5/8 inch Seal 9/16 inch diameter.

Price £6.36 per Yard or £6.89 per metre

 

Copyright 2008 Dugdale Vintage Motor Supplies